Filter
Top Products
10
BEFORE INSTALLATION
Rear View Back up Camera System Installation Cautions
• Bundle cables with tape or string so that they do not obstruct driving. Cables that become
entangled in the steering wheel, shift selector lever or brake pedal could cause an accident.
• Peel off the paper backing from the tape on the camera bracket and firmly attach the bracket to
the surface of the vehicle. If the tape is not completely adhered to the surface, the camera bracket
might become loose and fall off.
• When mounting the camera onto the glass surface, make sure the rear wiper does not hit the
camera while it operates. Otherwise, the camera could be damaged or destroyed.
• Install the camera so that it does not obstruct the opening or closing of the liftgate.
• Installing the camera in a position that obstructs vision is dangerous and could cause an accident.
Install the camera so that it does not obstruct the rear view or vehicle operation, and make sure it
does not protrude beyond the sides of the vehicle.
• To assure that the camera remains firmly attached to the vehicle:
a) Do not install the rear view back up camera system outdoors in rainy or foggy weather. High
humidity will prevent the camera from firmly adhering to the vehicle.
b) If installation is required in areas of high humidity, completely dry the surface where the
camera installation bracket is to be installed.
c) If the temperature where the camera installation bracket is to be installed is low (68°F or
lower), warm the location with a hair dryer so that the tape will adhere firmly to the surface. Do
not apply heat to the camera or the lens.
d) Do not install on a vehicle body or glass window with a surface that has been processed with
a fluorine resin coating.
• The vehicle can be driven immediately after installation as long as the following DO NOT occur
within a 24-hour period:
a) Water is poured on the vehicle surface.
b) The vehicle is driven in the rain.
c) Pulling or excessive force is applied to the camera.
• Temporarily hook up the system, confirm that the system functions properly, and
then install it permanently.
• If the system does not function properly, re-check the connections.
Notes