Filter
Top Products
Attaching the detachable device
1 Slide the detachable device all the way
into the base unit.
Make sure that the detachable device is se-
curely connected to the base unit terminal.
2 Press the center of the front of the de-
tachable device until you hear a click.
If you fail to successfully attach the detach-
able device to the base unit, try again but be
careful not to force it as the unit could be da-
maged.
Charging the battery of the
detachable device
! Charging cannot be done when the tempera-
ture is outside of the charging temperature
range.
! The operating temperature range of the bat-
tery is from –4°F to +140°F.
! The charging temperature range of thebattery
is from 32°F to +131°F.
The battery of the detachable device is
charged in the following situations.
! When the detachable device is attached to
the base unit while the ignition switch is
turned on (ACC ON).
! When the detachable device is connected
to your PC.
Monitoring the battery status
You can check the battery status of the detach-
able device.
1 Touch [Home] on the map screen.
The “Top Menu” screen appears.
2 Touch [Settings].
The “Settings Menu” screen appears.
The battery status indicator is displayed on the
upper right of the “Settings Menu” screen.
En
8
Chapter
02
Before you start