Filter
Top Products
Correcting the current location
Touch the screen to adjust the current position
and direction of the vehicle displayed on the
map.
1 Display the “Settings Menu” screen.
= For details of theoperations, refer to Dis-
playing the “Settings Menu” screen on
page 48.
2 Touch [Location].
3 Scroll to the position where you want
to set, then touch [OK].
Checking the connections
of leads
Check that leads are properly connected be-
tween the navigation system and the vehicle.
Please also check whether they are connected
in the correct positions.
1 Display the “Settings Menu” screen.
= For details of theoperations, refer to Dis-
playing the “Settings Menu” screen on
page 48.
2 Touch [Connection].
The “Connection” screen appears.
1
2
3
1 GPS Status
Indicates the connection status of theGPS
antenna, the reception sensitivity and from
how many satellites the signal is received.
Color
Signal com-
munication
Used in posi-
tioning
Orange Yes Yes
Yellow Yes No
2 Hand Brake*
When the parking brake is applied,“On” is
displayed. When the parking brake is re-
leased, “Off” is displayed.
3 Illumination*
When the headlights or small lamps ofa ve-
hicle are on, “On” is displayed. When the
small lamps of a vehicle areoff, “Off ” isdis-
played.
p Information marked with an asterisk (*) in-
dicates the status of connected AV receiver.
Proper status is displayedonly when the AV
receiver is correctly connected to the navi-
gation system.
Using the demonstration
guidance
This is a demonstration function for retail
stores. After a route is set, touching this key
starts the simulation of route guidance.
1 Display the “Settings Menu” screen.
= For details of theoperations, refer to Dis-
playing the “Settings Menu” screen on
page 48.
2 Touch [Demo Mode].
Each time you touch the key changes that set-
ting.
! On:
Repeats demo drive.
! Off (default):
Demo Mode is set off.
En
55
Chapter
12
Customizing preferences
Customizing preferences