Filter
Top Products
Battery status indicator
Fully charged
Sufficient power
Charging
Inserting and ejecting an
SD memory card
CAUTION
! Ejecting an SD memory card during data
transfer can damage the SD memory card. Be
sure to eject the SDmemory card by following
the procedure described in this manual.
! If data loss or corruptionoccurs on thesto-
rage device for any reason, it is usuallynot
possible to recover the data. Pioneer accepts
no liability for damages, costs orexpenses
arising from data loss or corruption.
p This system is not compatible with Multi
Media Card (MMC).
p Compatibility with all SD memory cards is
not guaranteed.
p This unit may not achieve optimum perfor-
mance with some SD memory cards.
p Do not insert anything other than SD mem-
or y cards.
p If data related to map data, such as custo-
mized POI data, is stored on the SD mem-
or y card, the navigation system restarts.
Inserting an SD memory card
% Insert an SD memory card into the SD
card slot.
Insert the card with the contact end first into
the SD card slot and press the card until it
clicks and completely locks.
Label side
Ejecting an SD memory card
1 Press the MODE button of the AV recei-
ver.
After a short pause, the navigation screen ap-
pears.
p The display will turn off if you press the
MODE button of the AV receiver immedi-
ately after the navigation system restarts, so
wait (approximately 10 seconds) after re-
start before pressing the MODE button.
= For details of theoperations, refer to Screen
switching overview on page 12.
2 Touch [Home] on the map screen.
The “Top Menu” screen appears.
3 Touch [Eject SD].
A message confirming whether to restart the
navigation system appears.
En
9
Chapter
02
Before you start
Before you start