Filter
Top Products
4 Enter the fuel consumption informa-
tion.
Enter the following items:
! Distance:
Enter the distance traveled since the pre-
vious fueling.
p The distance is entered automatically
only when the distance traveled since
the previous fueling is recorded.
! Gas Pumped:
Enter the amount of fuelpumped.
! Gas Price/Unit:
Enter the fuel unit price.
When all the items are entered, the fuel con-
sumption is displayed next to “Gas Mileage”.
5 Touch [OK].
The “Gas Mileage” screen appears.
Exporting the data of fuel cost
information
Exporting the fuel cost data to an SD memor y
card is possible.
p The data stored in this navigation system
will be cleared as exporting it to the SD
memory card.
p If there is previous data in the SD memory
card, the data is overwritten with new data
when current data is exported.
1 Insert an SD memory card into the SD
card slot.
= For details of theoperation, refer to Insert-
ing an SD memory card on page 9.
2 Touch [Home] on the map screen and
then touch [Navigation].
= For details of theoperations, refer to Screen
switching overview on page 12.
3 Touch [Gas Mileage].
The “Gas Mileage” screen appears.
4 Touch [Export].
After a message confirming whether to export
the data appeared, exporting the data to the
SD memory card starts.
The “Gas Mileage” screen appears when it is
done.
Exporting the data of “Gas
Mileage” from “Export/
Import Menu” screen
1 Insert an SD memory card into the SD
card slot.
= For details of theoperation, refer to Insert-
ing an SD memory card on page 9.
2 Touch [Home] on the map screen and
then touch [Navigation].
= For details of theoperations, refer to Screen
switching overview on page 12.
3 Touch [Data In/Out].
The “Export/Import Menu” screen appears.
En
45
Chapter
10
Fuel cost management
Fuel cost management