Filter
Top Products
Installation & Programming Manual FX & VFX Series Inverter/Charger System Copyright 2003 OutBack Power Systems, Inc.
900-0027-1 19009 62
nd
Ave NE, Arlington WA 98223 USA
Page 14 Rev 7.2 08/26/05 Tel 360 435 6030 Fax 360 435 6019
FX ACCESSORIES
ACA (AC CONDUIT ADAPTER)
This plastic box slips into grooves on the AC end of the FX. This adapter extends
the AC wiring compartment to match the PS4AC or PS2AC. It also provides more
room for wiring than is available when using the supplied AC conduit plate.
There is a 2-inch TSC cut-out on the plastic box to allow it to be used with the
PS4AC or PS2AC disconnect enclosure or 2-inch conduit.
The ACA may also be used for mounting two breakers OBDC breakers (rated for
AC) and/or an AC outlet through the knockouts provided.
DCA (DC CONDUIT ADAPTER)
The DCA allows the connection of 2-inch TSC conduit to the FX. It fits on the
opposite end of the FX from the AC wiring compartment. The location of the 2-
inch conduit opening matches the 2-inch knockouts provided in the PS4DC or
PS2DC enclosure.
When installing an FX with a PS4DC or PS2DC disconnect enclosure, both the
DCA and DCC (or Turbo) are required.
DCC (DC COMPARTMENT COVER)
The DCC covers the DC terminal area and allows a space which can be used to
mount other components such as a DC current shunt. The DCC can be used
with or without the DCA.
When installing an FX with a PS4DC or PS2DC disconnect enclosure, both the
DCA and DCC (or Turbo) are required.
The DCC is provided with all VFX inverter/chargers.