Olympus DM-420 Automobile Battery Charger User Manual


 
37
3
Playback
3 Press the
STOP
4 or
OK
button at
any point you want to stop the
playback.
• The recorder stops when it reaches the
end of the le. Continue pressing the 9
button to proceed with the cue from the
beginning of the next le.
Rewinding
Press and hold the 0 button while the
recorder is stopped.
When you release the button, the
recorder stops, but the [Playback
Position] will not be updated. Press the
PLAY ` or OK button to start playing
back from where it was stopped.
Press and hold the 0 button while playing
a file.
When you release the 0 button the
recorder will resume normal playback.
• If a temp mark ( P.38) or [Playback
Position] is marked in the middle of
the le, the playback stops once at that
position.
• The recorder stops when it reaches the
beginning of the file. Continue pressing
the 0 button to proceed with the review
from the end of the previous le.
• If the
0 button is kept pressed while the
recorder is stopped at the start of the top
le, the recorder will fast rewind starting
from the end of the last le.
Locating the Beginning of the File
Press the 9 button during playback, slow
playback, or fast playback.
The next file is cued and playback
starts at the previously set speed.
Press the 0 button during playback, slow
playback, or fast playback.
The file being played is cued and
playback starts at the previously set
speed.
Press the 0 button 2 times during playback,
slow playback or fast playback.
The previous file is cued and playback
starts at the previously set speed.
Playback
Stop a file playback at any point.
The stop position is memorized as a
[Playback Position] in the file. In this
status, even if you select an empty file,
move to the other folder, or turn the
recorder off, the playback starts from
the last memorized position when you
play the same file.
4 Playing back the contents file
which has been played back
halfway.
Press the PLAY `or OK button to
start playing back from where it was
stopped.
Forwarding
Press and hold the 9 button while the
recorder is stopped.
When you release the button, the
recorder stops, but the [Playback
Position] will not be updated. Press the
PLAY ` or OK button to start playing
back from where it was stopped.
Press and hold the 9 button while playing
a file.
When you release the 9 button the
recorder will resume normal playback.
• If a temp mark ( P.38) or [Playback
Position] is marked in the middle of
the le, the playback stops once at that
position.