Filter
Top Products
51
Navman SmartS™ Professional for Palm OS
®
5
13-2 GPS Settings
For Bluetooth and serial GPS users, use this screen to confi gure the GPS
port. Refer to Section 7-3 Confi guring the GPS Receiver.
If you are experiencing diffi culty with your GPS receiver, you may be asked
by Technical Support Staff to switch on the GPS Logging option:
1 From the MAIN MENU, select SETUP.
2 From the drop down list, select GPS.
3 Enable GPS Logging by checking the "GPS Logging" box.
13-3 Display Settings
If you fi nd that the display is diffi cult to see in certain light conditions, use
this function to change the color scheme. You can also enable / disable the
tutorial that is automatically run at startup of SmartS Professional.
1 From the MAIN MENU, select SETUP.
2 From the drop down list, select DISPLAY.
3 Modify the settings as required:
• Select either Day or Night from the Map Colors menu to
improve the contrast in light and dark conditions.
• Select your preferred Map Color Scheme by selecting from the
drop-down menu.
• To enable / disable the Tutorial check or uncheck the “Show at
startup” checkbox.
• To enable / disable fast map panning, check/ uncheck the "Fast
map panning" box.
Note: Backlight
brightness can
also be modifi ed
to suit viewing
conditions. Refer
to your Handheld
documentation for
instructions.
Sony Car Cradle
Users: Restricted
Function. Refer
Section 6-1.
Sony Car Cradle
Users: Restricted
Function. Refer
Section 6-1.
Tip for Sony Car
Cradle Users: Map
colors can also be
switched depending
on day/night mode of
the Car Cradle