Filter
Top Products
25
Navman SmartS™ Professional for Palm OS
®
5
Setting Your Destination
Before you travel, you must fi rst select a destination and allow SmartS Professional to plan your route. There are three
main ways that you can program your destination:
• Use a QUICK NAV that you have previously programmed for destinations used on a regular basis.
• Set a new DESTINATION using one of the following methods:
- enter a specifi c street address;
- select the intersection of two streets;
- choose a Point of Interest such as a hotel, school or hospital;
- use a Favorite destination that you have stored already;
- pick an address you have recently travelled to.
• Take a position straight from the map and program this as your destination.
9-1 Using a Quick Nav
You are able to save your three most frequently used destinations as Quick
Navs. This is the quickest and easiest way to set your route.
1 From the MAIN MENU, select QUICK NAV.
2 Select your previously programmed destination from the Quick Nav
list.
3 SmartS Professional will calculate the route from your current
position, and take you straight to the Navigation Screen.
For information on programming new Quick Navs, refer to Section 11-3
Quick Navs.
9