Filter
Top Products
75
iCN 600 series | User Manual
Activate Basemap
1. Disconnect the USB cable from the iCN.
The iCN will turn on.
• If the iCN does not turn on, press
for one second.
2. From the iCN Main Menu screen, select Preferences, then press OK.
3. From the Preferences screen, select Maps, then press OK
.
4. Complete one of the following:
• If the Basemap is on the iCN, from the Maps screen, select Internal Memory, then press OK.
The Maps - Internal Memory screen will display.
• If the Basemap is on the memory card, from the Maps screen, select Memory Card, then
press OK
.
The Settings - Memory Card screen will display.
5. To activate the Basemap, use the 8-way toggle to select the Basemap, then press OK to
select the check box.
6. Select Save using the right side of the 8-way toggle, then press OK.
The Main Menu screen will display.
Remove Basemap
1. Open Smart Desktop if it is not already open:
Start > Programs > Navman > Smart
Desktop 2005 for iCN600 series.
2. On the Map menu, click Basemaps.
The Navman Basemap Installer window will open.
3. Select the Basemap to remove.
4. Click the appropriate Remove button to remove the Basemap from your iCN, memory card
or memory card reader.