Filter
Top Products
40
iCN 600 series | User Manual
Case Study Two: Australia, Canada & USA
This case study will show you how to set a multi-stop trip by selecting your country, then area, then
street, then house number for each destination point.
Note: This case study applies to Australia, Canada and USA only. For navigating in Europe and
New Zealand,
see page 35.
Step One: Start Your Multi-stop Trip
a. From the Main Menu, select the Multi-stop Trip option.
The Multi-stop Trip screen will display.
b. Select Add, then press OK.
The Add to Trip screen will display.
c. Select Address or POI, then press OK.
The Destination screen will open.
Note: You can also add destination points using Favourites, recent destinations and
nearest Point of Interest.