Filter
Top Products
11
iCN 600 series | User Manual
Getting started
Inserting the iCN into the Suction-Mount
3. Open the GPS antenna outwards, so that it has a clear view of the sky.
4. iCN 650 users, United States, Canada and New Zealand users go to step 5,
otherwise continue:
Gently insert the card in the Memory Card slot with the label facing the front of the iCN.
(see page 15 for how to insert the memory card).
Note: Before inserting the memory card for the first time, remove the plastic space-saver
from the Memory Card slot:
gently push down on the top edge of the space-saver to
release it, and pull it out of the slot
5. Insert the iCN into the suction-mount:
a. Position the two locating-tabs on the underside of the iCN into the corresponding
slots on the socket-clip.
b. Snap the upper side of the iCN into the socket-clip.
6. Connect the iCN to the vehicle power supply:
a. Plug the small end of the In-Vehicle Power-Adaptor into the Power Socket on the left
side of the iCN.
b. Plug the other end of the In-Vehicle Power-Adaptor into the 12 V vehicle power-socket.
7. Press
for one second.
The iCN will turn on.
3
5
a b
4
*
6
a b
7
* Not iCN 650, United States, Canada or New Zealand users.