Filter
Top Products
10
iCN 600 series | User Manual
Getting started
3. Positioning the iCN in a Vehicle
The iCN can be mounted in a vehicle two ways:
1. By suction on the windscreen;
2. By suction, adhesive tape and screws drilled directly into the dashboard.
Note: This is a permanent solution and will mark your dashboard.
Follow the safety guidelines on page 7 to ensure that the iCN does not obstruct the driver’s view, or
interfere with the operation of vehicle airbags and safety devices.
Suction Mount
Assembling the iCN Suction-Mount
Choose a position on the windshield that is clearly visible to the driver without obstructing the
view of the road.
1. Assemble the suction-mount:
• Slip the locking-nut over the ballfoot.
• Snap the socket-clip onto the ballfoot.
• Screw the locking-nut onto the thread of the socket-clip until firm.
2. Use the alcohol swab to clean and dry the suction-cup and the mounting-area on the
windshield, then attach the suction-mount to the windshield:
a. Hold the suction-cup firmly against the windshield and
b. Press the lever towards the suction-cup.
2
1
a b
Click