Filter
Top Products
52
iCN 600 series | User Manual
12. Avoiding an Area*
You can calculate a route that avoids a specified area on the map. Up to ten Avoid Areas can be added.
Avoid Areas are displayed as shaded areas. If no alternative route around an Avoid Area exists, you will
be routed through an Avoid Area.
*iCN 630, 635, 650 only
Adding an Avoid Area
1. From the Main Menu screen, select Map, then press OK.
The 2D Map screen will display.
2. Press OK and use the 8-way toggle to place the cross-hair over the area that you want
to avoid.
3. Press OK to display the Pop-up menu.
4. Select Add Avoid Area, then press OK.
An Avoid Area is displayed.
5. Set the Avoid Area to the correct size and position using the 8-way toggle.
6. Press OK to enable the Avoid Area.
Deleting an Avoid Area
1. From the Main Menu screen, select Map, then press OK.
The 2D Map screen will display.
2. Press OK and use the 8-way toggle to place the cross-hair over the Avoid Area that you
want to delete.
3. Press OK to display the Pop-up menu.
4. Select Delete Avoid Area, then press OK.
The Avoid Area is deleted.
Deleting All Avoid Areas
1. From the Main Menu screen, select Preferences, then press OK.
2. From the Preferences
screen, select My Data, then press OK.
The My Data screen will display.
3. From the My Data screen, select Clear Data, then press OK.
The Clear Data screen will display.
4.
Select Clear Avoid Areas, then press OK. When the warning dialog-box opens, select
Yes, then
press OK.
5.
To return to the Main Menu, press .