Filter
Top Products
60 – 61
02 Prior to commissioning
Side view left
[
1
]
Locking lever for suction cup
[
2
]
Suction cup
[
3
]
Locking lever for ball-and-socket joint
[
4
]
Headphones jack
[
5
]
SD slot
2.2.3 Insert Memory Card
1. Carefully remove the Memory Card from its
packaging, taking care not to touch or soil the
contacts.
2. Hold the Memory Card so that the cut-off edge
is positioned downwards and to the left.
3. Carefully push the Memory Card into the card
slot on the LEFT SIDE of the device, until it
locks into position.
2.2.4 Removing the Memory Card
!
Note: all applications must be closed and the
navigation system turned off before the
Memory Card is removed.
1. Press lightly against the edge of the SD card
until the catch releases.
2. Pull the card out without touching the contacts.
[
Fig. 2
]
2.2.5 Installing the car holder
[
Fig. 3
]
!
Caution ! The car holder must be affixed to the
windscreen so that the view out of the
windscreen is not restricted.
!
Note: before installing the car holder, the
windscreen should be thoroughly cleaned with
a glass cleaner. The windscreen temperature
should not be below 15°C.
1. Place the holder with the suction cup onto the
windscreen.
[
Fig. 3
]
2. Press the lever on the suction cup in the
direction of the windscreen until it sticks to the
windscreen.
3. Place the navigation device into the car holder.
[
Fig. 4
]
4. Press the device against the car holder until it
clicks audibly into place.
5. Insert the power supply connector into the
cigarette lighter socket.
6. Release the catch for the ball-and-socket joint.
[
Fig. 5
]
7. Position the holder so that the display can
easily be seen.
[
Fig. 6
]
8. Press the catch for the ball-and-socket joint
back in the direction of the device.
9. Insert the mini USB connector of the car
charging cable into the power supply socket on
the back of the car holder.
[
Fig. 7
]
2.2.6 Switching on the navigation device
1. Press and hold the ON / OFF button for 1.5 sec.
[
Fig. 8
]
2. Select the desired language when prompted to
do so.
3. Touch the OK button. The START DISPLAY
appears.
4. Touch the NAVIGATION button in the START
DISPLAY in order to open the navigation
software.
5. Touch the MP3 PLAYER button in the START
DISPLAY in order to open the MP3 player.
[
1
]
[
4
]
[
2
]
[
5
]
[
3
]
Fig. 1
Fig. 2
Fig. 3