Filter
Top Products
Safety systems
Problem Possible causes/consequences and M Solutions
!
The yellow ABS warning
lamp is lit while the
engine is running.
G
Risk of accident
ABS (Anti-lock Brake System) is deactivated due to a malfunction.
Therefore, BAS (Brake Assist), ESP
®
(Electronic Stability Program),
EBD (Electronic Brake-force Distribution) and PRE-SAFE
®
are also
deactivated.
The brake system continues to function normally, but without the
functions listed above. The wheels could therefore lock if you
brake hard, for example.
X
Observe the additional display messages in the multifunction
display.
X
Drive on carefully.
X
Visit a qualified specialist workshop.
If the ABS control unit is faulty, there is also a possibility that other
systems, such as the navigation system or the automatic
transmission, will not be available.
!
The yellow ABS warning
lamp is lit while the
engine is running.
G
Risk of accident
The on-board voltage is too low. ABS has been deactivated due to
undervoltage.
Therefore, ESP
®
, BAS and PRE-SAFE
®
are also deactivated.
The brake system continues to function normally, but without the
functions listed above. The wheels could therefore lock if you
brake hard, for example.
X
Switch off consumers that are not required, e.g. the rear window
defroster or interior lighting.
ABS will be available again as soon as the vehicle's on-board
electrical system voltage increases.
If the warning lamp is still on:
X
Have the battery and alternator checked at a qualified specialist
workshop.
!
The yellow ABS warning
lamp is lit while the
engine is running.
Self diagnosis is not yet complete.
X
Carefully drive a suitable distance making slight steering
movements at a speed above 12 mph (20 km/h).
256
Warning and indicator lamps in the instrument cluster
On-board computer and displays
BA 164.8 USA, CA Edition B 2011; 1; 2, en-US
d2sboike Version: 3.0.3.5
2010-04-21T15:08:44+02:00 - Seite 256