Filter
Top Products
Selecting the unit of distance for the
digital speedometer
X
Press V or U on the steering wheel
to select the Settings menu.
X
Press & to call up the selection of
submenus.
X
Press the W or X button to select the
Instrument Cluster submenu.
X
Press the & button to display Display
Unit Digital speedometer.
X
Press the W or X button to select
Km or Miles as the unit of measurement for
distance.
X
Press the &, V or U button to
select a different display.
Selecting the language
The Language function allows you to select
the language for the instrument cluster.
X
Press V or U on the steering wheel
to select the Settings menu.
X
Press & to call up the selection of
submenus.
X
Press W or X to select the
Instrument Cluster submenu.
X
Press the & button to select Language.
X
Press the W or X button to select the
desired language.
X
Press the &, V or U button to
select a different display.
Selecting the status line display
X
Press V or U on the steering wheel
to select the Settings menu.
X
Press & to call up the selection of
submenus.
X
Press W or X to select the
Instrument Cluster submenu.
X
Press & to select Status Line
Display.
X
Press W or X to select the display in
the status line: speed (Speed) or outside
temperature (Outside Temperature).
The selected display now appears
constantly in the lower multifunction
display. When you scroll through the
Standard display menu (Y page 218), you
will see the display you have not selected.
X
Press the &, V or U button to
select a different display.
Time/date
Only vehicles without the navigation module
have this submenu. To set the time and date
on vehicles without the navigation module,
see the separate operating instructions.
In the Time / Date submenu, you can set the
time and date.
X
Press V or U on the steering wheel
to select the Settings menu.
X
Press & to call up the selection of
submenus.
X
Press the W or X button to select the
Time / Date submenu.
X
To set the clock: press & on the
steering wheel to select Clock Set hour
or Clock Set Minute(s).
or
X
To set the date: press & to select
Date Set day, Date Set Month or Date
Set Year.
X
Press W or X to set a value.
X
Press the &, V or U button to
select a different display.
Lighting
Switching the daytime running lamps on/
off
This function is not available in Canada.
If you have activated the daytime running
lamps function and the light switch is in the
$ or à position, the daytime running
222
Menus and submenus
On-board computer and displays
BA 164.8 USA, CA Edition B 2011; 1; 2, en-US
d2sboike Version: 3.0.3.5
2010-04-21T15:08:44+02:00 - Seite 222