Filter
Top Products
Function
E
Trip computer menu (Y page 227)
F
Telephone menu (Y page 227)
Standard display menu
Standard display
X
Press V or U on the steering wheel
to select the standard display.
Standard display
:
Trip odometer
;
Odometer
You can select the following functions in the
Standard display menu by pressing & or
*:
R
tire pressure loss warning system
(Y page 339) (Canada only)
R
tire pressure monitor (Y page 341) (USA
only)
R
coolant temperature (Y page 218)
R
digital speedometer or outside
temperature (Y page 218)
R
ASSYST PLUS service interval display
(Y page 299)
X
To reset the trip odometer: press and
hold the . reset button in the instrument
cluster until the trip odometer is reset.
Displaying the coolant temperature
G
Warning
Driving when your engine is overheated can
cause some fluids which may have leaked into
the engine compartment to catch fire. You
could be seriously burned.
Steam from an overheated engine can cause
serious burns which can occur just by opening
the engine hood. Stay away from the engine
if you see or hear steam coming from it.
Stop the vehicle in a safe location away from
other traffic. Turn off the engine, get out of the
vehicle and do not stand near the vehicle until
the engine has cooled down.
X
Press V or U on the steering wheel
to select the standard display.
X
Press the & or * button to select the
coolant temperature.
Under normal driving conditions, with the
correct anti-corrosion and antifreeze additive
concentration, the reading may rise to
248 ‡(120 †).
!
If the coolant temperature exceeds
248 ‡(120 †) do not continue driving. The
engine will otherwise be damaged.
Displaying the digital speedometer or
outside temperature
If you have selected the digital speedometer
for the status line (Y page 222), the outside
temperature will be displayed here.
218
Menus and submenus
On-board computer and displays
BA 164.8 USA, CA Edition B 2011; 1; 2, en-US
d2sboike Version: 3.0.3.5
2010-04-21T15:08:44+02:00 - Seite 218