Filter
Top Products
Head restraints on the outer seats in the 3rd row
of seats
X
Using both hands, reach backwards and
grasp the sides of the head restraint.
X
Pull the lower edge of the head restraint
forwards or backwards until it is in the
desired position.
Removing and installing the rear head
restraints
G
Warning!
Occupants should only travel sitting on seats
which have the head restraints installed. In
the event of an accident, this reduces the risk
of injury for passengers seated in the rear
compartment.
2nd row of seats: if you wish to remove/
install the head restraints from the outer
seats, you must fold the respective seat
backrest forwards (Y page 100).
3rd row of seats: if you wish to remove/install
the head restraints, you must fold the
respective seat backrest forwards
(Y page 100).
Outer seat head restraints in the 2nd row of seats
Head restraints on the outer seats in the 3rd row
of seats
X
To remove: pull the head restraint up to
the stop.
X
Press release catch : and pull the head
restraint out of the guides.
X
2nd row of seats: fold back the seat
backrest until it engages.
3rd row of seats: fold the seat up or down
(Y page 100).
X
To re-install: insert the head restraint so
that the notches on the bar are on the left
when viewed in the direction of travel.
X
Push the head restraint down until you hear
it engage in position.
X
2nd row of seats: fold back the seat
backrest until it engages.
3rd row of seats: fold the seat up or down
(Y page 100).
Seats
99
Seats, steering wheel and mirrors
BA 164.8 USA, CA Edition B 2011; 1; 2, en-US
d2sboike Version: 3.0.3.5
2010-04-21T15:08:44+02:00 - Seite 99
Z