Filter
Top Products
Function
i
Notes/tips
O
Interior temperature sensor
P
Switches the MONO function
on/off
Use the MONO function if you want to adopt the
temperature, air distribution and airflow settings
from the driver's side for all climate control zones.
The indicator lamp in the º button lights up.
Rear control panel
Q
Increases the airflow
R
Sets the temperature Set the temperature to 72 ‡ (22 †).
S
Sets the rear-compartment
climate control to automatic
T
Directs the airflow through the
rear air vents
U
Directs the airflow through the
footwell vents
V
Switches rear-compartment
climate control on/off
W
Reduces the airflow
Operating the control systems
Switching the control on/off
Important information
G
Warning!
When the climate control system is
deactivated, the outside air supply and
circulation are also deactivated. Only choose
this setting for a short time. Otherwise the
windows could fog up, impairing visibility and
endangering you and others.
i
Activate climate control primarily using
the à button (Y page 138).
Activating/deactivating the front
climate control using the front control
panel
X
Turn the key to position 2 in the ignition
lock.
X
To activate: press the à button.
The indicator lamp in the à button lights
up. Airflow and air distribution are set to
automatic mode.
or
X
Press the ^ button.
The indicator lamp in the ^ button goes
out. The previously selected settings come
into effect again.
X
To deactivate: press the ^ button.
The indicator lamp in the ^ button lights
up.
136
Operating the control systems
Climate control
BA 164.8 USA, CA Edition B 2011; 1; 2, en-US
d2sboike Version: 3.0.3.5
2010-04-21T15:08:44+02:00 - Seite 136