Mercedes-Benz 2011 GL350 BlueTEC SUV Automobile User Manual


 
Display messages Possible causes/consequences and M Solutions
+
Key Not Detected
(red display message)
The KEYLESS-GO key is not in the vehicle.
If the engine is switched off, you can no longer lock the vehicle
centrally or start the engine.
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X
Engage the parking brake.
X
Locate the KEYLESS-GO key.
The KEYLESS-GO key is not detected while the engine is running
because there is interference from a strong source of radio waves.
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X
Engage the parking brake.
X
Operate the vehicle with the SmartKey in the ignition lock if
necessary.
+
Key Not Detected
(white display
message)
The KEYLESS-GO key cannot be detected at present.
X
Change the location of the SmartKey with the KEYLESS-GO
functions in the vehicle.
If the KEYLESS-GO key is still not detected:
X
Change the location of the SmartKey with the KEYLESS-GO
functions in the vehicle.
X
Operate the vehicle with the key in the ignition lock if necessary.
+
Key Detected In
Vehicle
The KEYLESS-GO key has been detected inside the vehicle during
locking.
X
Remove the KEYLESS-GO key from the vehicle.
+
Pull starting
button out then
insert key
The KEYLESS-GO key can continuously not be detected.
X
Insert the SmartKey into the ignition lock and turn it to the
desired position.
X
Visit a qualified specialist workshop.
Display messages
253
On-board computer and displays
BA 164.8 USA, CA Edition B 2011; 1; 2, en-US
d2sboike Version: 3.0.3.5
2010-04-21T15:08:44+02:00 - Seite 253
Z