Filter
Top Products
Vehicle status messages in the multifunction display
317
Display messages Possible cause/consequence Possible solution
Only shift to P
when vehicle is
at a
standstill.
You have attempted to shift the automatic
transmission into park position P although
the vehicle was still in motion.
X
Stop the vehicle.
P Shift to P or N to
start engine.
You have attempted to start the engine
with the KEYLESS-GO start/stop button
while the automatic transmission was in
reverse gear R or drive position D.
X
Shift the automatic transmission into park
position P or neutral position N. Make sure the
brake pedal is depressed.
Tires
Display messages Possible cause/consequence Possible solution
Check tires, then restart Run
Flat Indicator.
There has been a warning message about
a loss in the tire inflation pressure and the
Run Flat Indicator was not restarted yet.
X
Make sure the correct tire inflation pressure is
set for each tire.
X
Then restart the Run Flat Indicator
(Y page 262).
Run Flat
Indicator
Inoperative
The Run Flat Indicator is malfunctioning.
X
Have the Run Flat Indicator checked at an
authorized Mercedes-Benz Center.
Practical hints
Z