Filter
Top Products
Loading and storing
218
1
Holder behind B-Pillar
2
Holder behind C-Pillar
R
With the cargo volume expanded in part
(Y page 210), use holders behind C-pillars
2 and the cargo tie-down rings in the third-
row footwell (Y page 209).
R
With the cargo volume fully expanded
(Y page 211), use holders behind B-pillars
1 and the cargo tie-down rings in the
second-row footwell (Y page 209).
X
Open the hook and loop fasteners on the
cargo net package.
X
Roll out the cargo net.
X
Unfold the cargo net.
X
Engage the lower cargo net bar.
The cargo net bar must engage audibly.
Installing the cargo net
Cargo net installed behind the C-pillar
1
Holder
2
Cargo net bar
3
Cargo net bar
X
Hang cargo net bar 2 on holder 1 as
indicated by the arrow.
X
Push cargo net bar 2 forward into holder
1 in direction of arrow.
X
Engage cargo net bar 3.
The cargo net bar must engage audibly.
Pulling the cargo net tight
Belt hook attached in the third-row footwell
1
Belt hook
2
Cargo tie-down ring
3
Tightening belt
X
Hook belt hook 1 into cargo tie-down ring
2 in direction of arrow.
X
Pull tightening belt 3 by the loose end in
direction of arrow until the cargo net is
pulled tight.
X
After driving a short distance, make sure
the cargo net is still tight and, if necessary,
pull it tight again.
Controls in detail