Filter
Top Products
Loading and storing
223
X
Pull release handle 2.
The front part of center console 1 is
released from base 3.
X
Lift center console 1 in direction of arrow
4 and hold it there.
X
While holding center console 1 up, grip
handle 5.
X
Lift center console 1 at rear handle 5 to
release the center console from anchorage
points 6.
X
Take center console 1 out of the vehicle.
i
Rear center console base 3 cannot be
removed.
Installing
G
Warning!
The rear center console must be properly
installed on the center console base.
Driving with the rear center console not
properly installed on the rear center
console base may cause the rear center
console to come loose and be thrown
around in the vehicle interior, causing injury
to vehicle occupants during
R
braking
R
vehicle maneuvers
R
an accident
You can install the rear center console in two
different positions. In the most forward
position (position 1) you can expand the
cargo compartment fully (Y page 211)
without removing the rear center console.
i
The storage compartment and the cup
holders in the rear center console are only
illuminated, when the rear center console
is installed in the most rearward position
(position 0).
1
Latch (position 1)
2
Latch (position 0)
3
Rear center console base
4
Anchorage point (position 1)
5
Anchorage point (position 0)
3
Rear center console base
6
Rear center console
X
Position center console 6 above base
3.
X
Insert the tabs at rear of center console
6 into anchorage points 4 or 5 on base
3.
X
Guide front of center console 6 down
towards base 3.
Center console 6 must rest on base 3.
X
Press down on front of center console 6
until it audibly engages in latch 1 or 2.
Controls in detail
Z