Filter
Top Products
Where will I find ...?
303
For information on where to place wheel
chocks when changing a wheel, see “Lifting
the vehicle” (Y page 366).
Jack
G
Warning!
Only use the jack supplied with your vehicle
to lift the vehicle briefly for wheel changes.
If you use the jack for any other purpose,
you or others could be injured, as the jack
is designed only for the purpose of
changing a wheel.
When using the jack, observe the safety
notes in the “Mounting the spare wheel”
section and the notes on the jack.
X
Take the jack from the vehicle tool kit
(Y page 300).
Storage position
X
Take the reversible ratchet from the vehicle
tool kit.
Operational position
1
Jack
2
Reversible ratchet
X
Attach reversible ratchet 2 to jack 1 in
such a way that the word UP can be seen.
Before placing the jack back into the vehicle
tool kit:
X
Fully collapse the jack (storage position).
X
Remove the reversible ratchet.
Spare wheel
G
Observe Safety notes, see
page 365.
i
The R 320 BlueTEC does not have a spare
wheel.
The spare wheel is located in the space
underneath the cargo compartment floor.
X
Removing: Open the tailgate (Y page 90).
X
Lift the cargo compartment floor
(Y page 301).
!
To prevent damage, always disengage the
securing hook from upper cargo
compartment lip and lower the cargo
compartment floor before closing the
tailgate.
X
Remove the jack from the vehicle tool kit
(Y page 302).
Practical hints
Z