Filter
Top Products
Control system
153
X
Press the reset button in the instrument
cluster for approximately 3 seconds.
X
Press the reset button once more.
The functions of all the submenus will be
reset to factory settings.
The settings you have changed will not be
reset unless you confirm the action by
pressing the reset button a second time. After
approximately 5 seconds, the Settings
menu reappears in the multifunction display.
Submenus in the Settings menu
X
Press button è or ÿ repeatedly until
the Settings menu appears in the
multifunction display.
X
Press button j.
The collection of the submenus appears in
the multifunction display. There are more
submenus than can be simultaneously
displayed.
X
Press button ç.
The selection marker moves to the next
submenu.
X
Scroll down with button ç, scroll up
with button æ.
X
With the selection marker on the desired
submenu, use button j to access the
individual functions within that submenu.
X
Once within the submenu, use button
j to move to the next function or button
k to move to the previous function
within that submenu.
X
Use button æ or ç to change the
settings of the respective function.
The following lists show what settings can be
changed within the various menus. Detailed
instructions on making individual settings can
be found on the following pages.
Instrument cluster submenu
R
Selecting speedometer display mode
(Y page 154)
R
Selecting language (Y page 154)
R
Selecting display (digital speedometer or
outside temperature) for status indicator
(Y page 155)
Time/Date submenu
R
Setting the time (Y page 155)
R
Setting the date (Y page 155)
Lighting submenu
R
Setting daytime running lamp mode (USA
only) (Y page 156)
R
Setting locator lighting (Y page 156)
Controls in detail
Z