Filter
Top Products
Loading and storing
216
X
Rolling out blind: Pull blind on handle 1
across the cargo compartment.
X
Guide blind into mounts 2 and release.
X
Rolling up blind: Disengage blind and
guide retraction by its handle 1.
Removing and installing blind
Blind installed behind second-row seats
1
Release button
2
Blind
X
Removing: Roll up blind 2.
X
Push release button 1.
X
Pull blind 2 to the left until it engages.
X
Installing: For installation behind second
row seats, install the blind extensions
(Y page 217).
!
For installation behind third-row seats,
the blind extensions must not be installed.
Otherwise, blind could be damaged.
X
Remove the mount covers in the side trims
of the third seat row when installing roller
blind 2 behind the second-row seats.
Mount cover behind second-row seats
X
Press on cover at its lower edge as
indicated by arrow.
The cover’s upper edge flips up.
X
Remove cover by pulling its upper edge out
of side trim in direction of arrow.
i
To avoid loss of the covers, keep them in
a safe place while not in use, e.g. the glove
box.
X
Make sure release button 1 faces up and
the roller blind handle (Y page 215) is to
the rear before inserting the roller blind.
X
Place left side of blind 2 in left mount.
X
Position right side of blind 2 over right
mount.
X
Press release button 1 and guide blind
2 into mount.
X
Make sure the cargo compartment cover
blind is securely fastened.
Controls in detail