Filter
Top Products
Lighting
118
Locator lighting and night security
illumination
Locator lighting and night security
illumination are described in the “Control
system” section, see “Setting locator
lighting” (Y page 156) and “Setting night
security illumination (Headlamps delayed
shut-off feature)” (Y page 157).
Combination switch
1
High beam
2
High-beam flasher
High beam
X
Turn the exterior lamp switch to position
B (Y page 115).
X
Switching on: Push the combination
switch in direction of arrow 1.
The high-beam headlamp indicator lamp
A in the instrument cluster comes on.
X
Switching off: Pull the combination switch
in direction of arrow 2 to its original
position.
High-beam flasher
X
Switching on: Pull the combination switch
briefly in direction of arrow 2.
Turn signals
1
Turn signals, right
2
Turn signals, left
X
Press the combination switch in direction
of arrow 1 or 2.
The corresponding turn signal indicator
lamp L or K in the instrument
cluster flashes.
The combination switch resets automatically
after major steering wheel movements.
i
To signal minor directional changes such
as changing lanes, press combination
switch only to point of resistance and
release. The corresponding turn signal
lamps will flash three times.
Controls in detail