Filter
Top Products
80
Safety and Security
Occupant safety
1 Seat belt housing
2 Latch plate
3 Buckle
4 Release button
Enhanced seat belt reminder system
When the engine is started, the seat belt
telltale < illuminates for a maximum of
6 seconds and a warning chime sounds to
remind you and your passenger to fasten
your seat belts.
If after these 6 seconds, the driver’s or the
passenger’s seat belt (with the passenger
seat occupied) are not fastened with all
doors closed,
ț and the vehicle speed does not exceed
15 mph (25 km/h), the seat belt
telltale < remains illuminated for as
long as either the driver’s or
passenger’s seat belt is not fastened
ț and the vehicle speed exceeds
15 mph (25 km/h), the seat belt
telltale < starts flashing and a
warning chime sounds with increasing
intensity until both the driver’s and
passenger’s seat belt are fastened, or
for a maximum of 60 seconds from
the time the vehicle speed
exceeded 15 mph (25 km/h) if either
the driver’s or passenger’s seat belt
remains unfastened.
If the driver’s or passenger’s seat belt
remains unfastened after 60 seconds,
the seat belt telltale < stops flash-
ing and the warning chime stops
sounding. The seat belt telltale <
then continues to be illuminated for as
long as either the driver’s or passen-
ger’s seat belt are not fastened.
The seat belt telltale < will only go out
if both the driver’s and the passenger’s
seat belt (with the front passenger seat oc-
cupied) are fastened, or the vehicle is
standing still and a front door is opened.
For more information, on the seat belt
telltale <, see the “Practical hints” sec-
tion (
୴ page 341).