Filter
Top Products
151
Controls in detail
Control system
Selecting MP3-CD track
̈ Turn on COMAND and select MP3-CD.
Refer to the separate COMAND operat-
ing instructions.
̈ Press button è or ÿ repeatedly
until the settings for the MP3-CD cur-
rently being played appear in the right
multifunction display.
1 Current track
̈ Press button k or j repeatedly
until the desired track is selected.
NAV menu
The
NAV
menu contains the functions need-
ed to operate your navigation system.
̈ Press button è or ÿ repeatedly
until you see the message
NAV
in the
left multifunction display.
The message shown in the multifunction
display depends on the status of the navi-
gation system:
ț With COMAND switched off, the mes-
sage
NAV off
appears in the
multifunction display.
ț With COMAND switched on but route
guidance not activated, the direction of
travel and, if applicable, the name of
the street currently traveled on appear
in the multifunction display.
ț With COMAND switched on and route
guidance activated, the direction of
travel and maneuver instructions ap-
pear in the multifunction display.
Please refer to the COMAND manual for in-
structions on how to activate the route
guidance system.
Distronic* menu
Use the
Distronic
menu (୴ page 217) to
display the current settings for your Dis-
tronic system. The information shown in
the multifunction display depends on
whether the Distronic system is activated
or deactivated.
Please refer to the “Driving systems” sec-
tion of this manual (
୴ page 213) for in-
structions on how to activate Distronic.
̈ Press button è or ÿ repeatedly
to select the
Distronic
menu in the
multifunction display.