Filter
Top Products
154
Controls in detail
Control system
̈ Press the reset button in the instru-
ment cluster for approximately
3 seconds.
In the right multifunction display you
will see the request to press the reset
button again to confirm.
̈ Press the reset button again.
The functions of all the submenus will
reset to factory settings.
Submenus in the Settings menu
̈ Press button è or ÿ repeatedly
until the
Settings...
menu appears in
the multifunction display.
̈ Press button j.
In the right multifunction display you
see the collection of submenus. There
are more submenus than can be simul-
taneously displayed.
̈ Press button ç.
The selection marker moves to the next
submenu.
̈ Scroll down with the ç button,
scroll up with the æ button.
̈ With the selection marker on the de-
sired submenu, use the j button to
access the individual functions within
that submenu.
̈ Once within the submenu, use the
j button to move to the next func-
tion or the k button to move to the
previous function within that submenu.
̈ Use buttons æ or ç to change
the settings of the respective function.
i
The settings you have changed will not be re-
set unless you confirm the action by pressing the
reset button a second time.
୴୴