Filter
Top Products
44
Getting started
Adjusting
Seat height
̈ Press the switch up or down in
direction of arrow 2.
Seat cushion tilt
̈ Press the switch up or down in
direction of arrow 3 until your upper
legs are lightly supported.
Seat cushion depth
̈ Press the switch forward or backward
in direction of arrow 4 until your legs
are supported comfortably.
Seat backrest tilt
̈ Press the switch forward or backward
in direction of arrow 6 until your arms
are slightly angled when holding the
steering wheel.
Head restraint height
̈ Press the switch up or down in
direction of arrow 1.
Head restraint tilt
Manually adjust the angle of the head re-
straint.
̈ Push or pull on the lower edge of the
head restraint cushion.
For more information on seats, see “Seats”
(
୴ page 121).
Warning! G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that it is as close to
the head as possible and the center of the
head restraint supports the back of the head
at eye level. This will reduce the potential for
injury to the head and neck in the event of
an accident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.
i
When moving the seat fore or aft after ad-
justing the head restraints, the head restraints
may readjust automatically.