Filter
Top Products
153
Controls in detail
Control system
Should the vehicle’s system record any
conditions while driving, the number of
messages will reappear in the multifunc-
tion display
ț when the SmartKey in the starter
switch is turned to position 0 or re-
moved from the starter switch
or
ț when you turn off the engine by press-
ing the KEYLESS-GO* start/stop but-
ton on the gear selector lever once and
open the driver’s door (this puts the
starter switch in position 0, same as
with the SmartKey removed from the
starter switch)
Settings menu
In the
Settings
menu there are two func-
tions:
ț The function
Reset
, with which you can
reset most settings to those set at the
factory.
ț A collection of submenus with which
you can make individual settings for
your vehicle.
The following settings and submenus are
available:
Resetting all settings
You can reset the functions of most of the
submenus to the factory settings.
For safety, the
Light circuit Headlamp
mode
submenu in the
Lighting
menu can
be reset with the vehicle at standstill only.
̈ Press button è or ÿ repeatedly
until the
Settings...
menu appears in
the multifunction display.
i
The vehicle status message memory will be
cleared when you then turn the SmartKey in the
starter switch to position 1 or 2, or when you
press the KEYLESS-GO* start/stop button once
or twice without depressing the brake pedal. You
will then only see high priority messages in the
multifunction display (
୴ page 347).
Function Page
Resetting all settings 153
Submenus in the Settings menu 154
Instrument cluster submenu 156
Time submenu 157
Lighting submenu 159
Vehicle submenu 162
Convenience submenu 162
୴୴