Filter
Top Products
166
Controls in detail
Control system
Which messages will appear in the right
multifunction display depends on whether
your telephone is switched on or off:
ț If the telephone is off, the message in
the multifunction display is:
TEL off
.
ț If the telephone is on:
The telephone will then search for a
network. During this time the right mul-
tifunction display is empty.
As soon as the telephone has found a
network,
READY
is indicated in the right
multifunction display.
ț This standby message indicates that
your telephone is ready for use and you
can operate it using the control sys-
tem.
Answering a call
When your telephone is ready to receive
calls, you can answer a call at any time. In
the right multifunction display you will then
see the message:
̈ Press button s.
You have answered the call. In the right
multifunction display you see the dura-
tion of the call.
Ending a call
̈ Press button t.
You have ended the call. In the right
multifunction display you will again see
the standby message.
Dialing a number from the phone book
If your telephone is ready to receive calls,
you may select and dial a number from the
phone book at any time.
̈ Press button ÿ or è repeatedly
until you see the
TEL
menu in the left
multifunction display.
In the right multifunction display you
will see the standby message.
i
If you do not wish to accept a call, press
button t.