Filter
Top Products
400
Practical hints
Replacing bulbs
4 High beam bulbs
5 Locking mechanism
6 Parking and standing lamps
Front turn signal bulb
̈ Turn bulb socket 1 counterclockwise
and pull it out.
̈ Push the bulb into socket 1, turn
socket 1 counterclockwise and re-
move it.
̈ Insert the new bulb in socket 1, push
and turn bulb socket 1 clockwise.
̈ Reinsert bulb socket 1 in lamp and
turn bulb socket 1 clockwise.
High beam/ high beam flasher bulbs
̈ Press ends of headlamp cover tab to-
gether and remove high beam head-
lamp cover 2.
̈ Pull the electrical connector off.
̈ Turn locking mechanism 5 counter-
clockwise and take out the bulb.
̈ Insert the new bulb so that the base lo-
cates in the recess on the holder.
̈ Turn locking mechanism 5 clockwise.
̈ Plug the connector onto the bulb.
̈ Align high beam headlamp cover 2
and click it into place.
Warning! G
Do not remove the cover for the Xenon or
Bi-Xenon* headlamp. Because of high volt-
age in Xenon and Bi-Xenon* lamps, it is dan-
gerous to replace the bulb or repair the lamp
and its components. We recommend that
you have such work done by a qualified
technician.