Filter
Top Products
276
Operation
Engine compartment
Checking engine oil level with the
control system
When checking the oil level
ț the vehicle must be parked on level
ground
ț with the engine at operating tempera-
ture, the vehicle must have been sta-
tionary for at least 5 minutes with the
engine turned off
ț with the engine not at operating tem-
perature, the vehicle must have been
stationary for at least 30 minutes with
the engine turned off
̈ Switch on the ignition (୴ page 39).
The standard display (
୴ page 139)
should appear in the multifunction dis-
play.
̈ Press button k or j on the
steering wheel until the following
message appears in the multifunction
displays:
One of the following messages will
subsequently appear in the right multi-
function display:
ț
Engine oil level
OK
ț
Add 1.0 qt.
to reach max.
oil level
(Canada:
1.0 l
)
ț
Add 1.5 qts.
to reach max.
oil level
(Canada:
1.5 l
)
ț
Add 2.0 qts.
to reach max.
oil level
(Canada:
2.0 l
)
i
If you want to interrupt the checking proce-
dure, press the k or j button on the
multifunction steering wheel.