Filter
Top Products
326
Operation
Vehicle care
̈ Restart the engine after cleaning
sensor cover 1.
Cleaning the Parktronic system*
sensors
1 Parktronic system* sensors in front
bumper
̈ Use a mild car wash detergent, such as
Mercedes-Benz approved Car
Shampoo, with plenty of water and a
soft, non-scratching cloth to clean
sensors 1 on the bumpers.
Cleaning the windows and the wiper
blades
̈ Make sure the hood is fully closed.
̈ Switch on the ignition (୴ page 39).
̈ Turn combination switch to wiper
setting II (
୴ page 57).
̈ With wiper arms in vertical position,
switch off the ignition (
୴ page 39).
!
To prevent scratches or damage, never ap-
ply strong force and only use a soft, non-scratch-
ing cloth when cleaning Distronic system sensor
cover 1. Do not attempt to wipe dirty sensor
with a dry cloth or sponge.
!
Do not apply strong pressure to the sensor
covers. Applying strong pressure may damage
the sensor covers.
Follow the instructions provided by the power
washer manufacturer on maintaining a distance
between the vehicle and the nozzle of the power
washer.
!
To prevent scratches, never apply strong
force and only use a soft, non-scratching cloth
when cleaning the sensors. Do not attempt to
wipe dirty sensors with a dry cloth or sponge.
!
The windshield wipers must be in a vertical
position before folding them away from the wind-
shield. They could otherwise damage the hood.
Never open the hood when the wiper arms are
folded forward.
୴୴