Filter
Top Products
96
Controls in detail
Seats
Multicontour seat*
Some models may be equipped with driv-
er’s multicontour seat. This seat has a
movable seat cushion and inflatable air
cushions built into the backrest to provide
additional lumbar and side support.
The seat cushion movement, backrest
cushion height and curvature can be con-
tinuously varied with regulators on the
right side of the seat after turning the
SmartKey in the starter switch to
position 2.
1 Seat cushion depth
2 Backrest bottom
3 Backrest center
4 Side bolster adjustment
Adjusting the multicontour seat in the or-
der listed above is recommended.
̈ Check that the ignition is switched on.
All lamps in the instrument cluster light
up.
The seat cushion movement, backrest
cushion height and curvature can be con-
tinuously varied with regulators 1, 2 and 3.
The side bolsters of the backrest can be
adjusted with rocker switch 4.
̈ Press to the left.
Side support will be increased.
̈ Press to the right.
Side support will be decreased.
i
When the engine is turned off, the last
cushion setting is retained in memory,
and the cushion is automatically ad-
justed to this setting when the engine
is restarted.