Filter
Top Products
188
Controls in detail
Power windows
If you pull and hold the switch up when
closing the window, and upward move-
ment of the window is blocked by some ob-
struction including but not limited to arms,
hands, fingers etc., the automatic reversal
will not operate.
Fully opening windows
̈ Press switch past resistance point and
release.
The window opens completely.
Fully closing windows
̈ Pull switch past resistance point and
release.
The window closes completely.
If the upward movement of the window is
blocked during the closing procedure, the
window will stop and open slightly.
Stopping windows
̈ Press or pull respective switch again.
Opening and closing the windows with
the Smartkey
The sliding/pop-up roof* will also be
opened or closed when the power windows
are operated with the key (
୴ page 191).
̈ Aim transmitter eye at the front door
handle.
Warning! G
Driver’s door only:
If within five seconds the switch 1 is again
pulled past the resistance point and re-
leased, the automatic reversal will not oper-
ate.
i
You can also open or close the win-
dows using the
ț SmartKey (summer opening/con-
venience feature), see below
ț button O in the control panel of
the climate control (
୴ page 149) or
automatic climate control
(
୴ page 157)
ț button e in the control panel of
the automatic climate control
(
୴ page 157)
Warning! G
Never operate the windows or slid-
ing/pop-up roof* if there is the possibility of
anyone being harmed by the opening or
closing procedure.
In case the procedure causes potential
danger, the procedure can be immediately
halted by releasing the control button. To
reverse direction of movement, press
button
Œ for opening or ‹ for
closing.