Filter
Top Products
283
Practical hints
Where will I find ...?
Removing the Minispare wheel
̈ Lift trunk floor cover and engage trunk
floor handle in upper edge of trunk.
̈ Loosen the retaining screw
(
୴ page 279) in the middle of storage
well casing.
̈ Remove the storage well casing.
̈ Remove vehicle tool kit storage well
casing 4.
̈ Remove Minispare wheel 3.
Storing the Minispare wheel
̈ Place Minispare wheel 3 in wheel well.
̈ Place vehicle tool kit storage well
casing 4 over the Minispare wheel. Be
sure that the arrow 2 on storage well
casing 4 points in the direction of
travel.
̈ Place storage well casing (୴ page 279)
over the vehicle tool kit storage well
casing 4 and turn the retaining screw
(
୴ page 279) clockwise to its stop to
secure the Minispare wheel.
i
The arrow 2 on vehicle tool kit storage
well casing 4 must point in the
direction of travel, otherwise you
cannot place the storage well casing
(
୴ page 279) on top and secure the
Minispare wheel with the retaining
screw (
୴ page 279).
!
To prevent damage, always disengage
trunk floor handle from upper edge of
trunk and lower trunk floor before
closing the trunk lid.
Warning! G
The dimensions of the Minispare wheel are
different from those of the road wheels. As
a result, the vehicle handling characteristics
change when driving with a Minispare wheel
mounted.
The Minispare wheel should only be used
temporarily, and should be replaced with a
regular road wheel as quickly as possible.