Filter
Top Products
131
Controls in detail
Control system
Setting key dependency
Use this function to set whether the
memory settings for the seats, the steering
wheel and the mirrors should be stored
separately for each key (
୴ page 84).
̈ Move the selection marker with
the
æ or ç button to the
CONVENIENCE
submenu.
̈ Press button j or k repeatedly
until you see this message in the
display:
SETTINGS KEY-DEPENDENT
.
The selection marker is on the current
setting.
̈ Press æ or ç to set key
dependency to
ON
or
OFF
.
Setting parking position for exterior rear
view mirror
Use the
MIRROR SETTING WHEN PARKING
function to select whether the passen-
ger-side exterior rear view mirror should be
turned downward during parking maneu-
vers, when reverse gear is engaged.
For additional information, see “Activating
exterior rear view mirror parking position”
(
୴ page 145).l
̈ Move the selection marker with
the
æ or ç button to the
CONVENIENCE
submenu.
̈ Press button j or k repeatedly
until you see this message in the
display:
MIRROR SETTING WHEN
PARKING
.
The selection marker is on the current
setting.
̈ Press æ or ç to switch function
ON
or
OFF
.