Filter
Top Products
34
Getting started
Adjusting
1 Release knob
̈ Manually adjust the height of the head
restraint by pulling it upward. To lower
the head restraint, push release knob 1
and push down on the head restraint.
Head restraint tilt
̈ Manually adjust the angle of the head
restraint. Push or pull on the lower
edge of the head restraint cushion.
More information can be found in the
“Controls in detail” section (
୴ page 93).
Power seat*
̈ Turn the key in the starter switch to
position 1 or 2 .
or
̈ Open the driver’s or front passenger
door.
The seat adjustment switches are located
in each front door.
1 Head restraint height
2 Seat height
3 Seat cushion tilt
4 Seat fore and aft adjustment
5 Backrest tilt
Seat fore and aft adjustment
̈ Press the switch forward or backward
in the direction of arrow 4.
Adjust to a comfortable seating posi-
tion that still allows you to reach the
accelerator/brake pedal safely. The
position should be as far rearward as
possible, consistent with ability to
properly operate controls.
i
When moving the seat, be sure that
there are no items in the footwell or be-
hind the seat. Otherwise you could
damage the seat.
With the memory function*
(
୴ page 98), you can store seat
positions together with settings for the
steering wheel and the exterior rear
view mirrors.