Filter
Top Products
119
Controls in detail
Control system
̈ Press button è or ÿ repeatedly
until you see the malfunction message
memory in the display.
No malfunction messages
If no malfunctions have occured, the
message in the display is:
NO MALFUNCTION
Malfunctions have occurred
If malfunctions have occurred, you will see
the number of malfunctions in the display:
1 Number of malfunctions
̈ Press button k or j.
The stored messages will now be dis-
played in order. See the “Practical
hints” section for malfunction and
warning messages (
୴ page 261).
Should any malfunctions occur while
driving, the number of malfunctions will
reappear in the display when the key in the
starter switch is turned to position 0 or
removed from the starter switch.
Settings menu
In the
SETTINGS
menu there are two
functions:
ț The function
RESET TO FACTORY
SETTINGS
, with which you can reset all
the settings to the original factory
settings.
ț A collection of submenus with which
you can make individual settings for
your vehicle.
̈ Press button è or ÿ repeatedly
until the
SETTINGS
menu is seen in the
display.
i
The message memory will be cleared
when you turn the key in the starter
switch to position 1 or 2. You will then
only see high-priority messages in the
multifunction display (
୴ page 261).