Filter
Top Products
104
Controls in detail
Lighting
Combination switch
The combination switch is located on the
left side of the steering column.
1 High beam
2 High beam flasher
Switching on high beams
̈ Turn exterior lamp switch to
position
B or to U
(
୴ page 101).
̈ Push the combination switch in
direction 1.
The high beam symbol is illuminated on
the instrument cluster.
High beam flasher
̈ Pull the combination switch briefly in
direction 2.
Hazard warning flasher
The hazard warning flasher can be activat-
ed with the ignition switched on or off. It is
activated automatically when an airbag is
deployed.
The switch is located on the center con-
sole.
1 Hazard warning flasher switch
Switching on the hazard warning
flasher
̈ Press the hazard warning flasher
switch.
All turn signals will blink.
Switching off the hazard warning
flasher
̈ Press hazard warning flasher switch
again.
i
With the hazard warning flasher acti-
vated and the combination switch set
for either left or right turn, only the re-
spective left or right turn signals will
operate when the key in the starter
switch is in position 1 or 2.