Filter
Top Products
118
Controls in detail
Control system
Operate the cassette player
̈ Turn on the radio and select the
Casette player (
୴ page 174).
Vehicles with COMAND*: Refer to
separate operating instructions.
̈ Press button è or ÿ repeatedly
until the settings for the cassette
currently being played are shown in the
display.
1 Current side
̈ Press button j to fast forward to
the next track.
̈ Press button k to rewind the
cassette to the beginning of the current
track.
NAVI menu
The
NAV
menu contains the functions
needed to operate your navigation system.
̈ Press button è or ÿ repeatedly
until you see the message
NAV
in the
display.
ț If the navigation system is switched off,
the message
NAV OFF
is shown in the
display.
ț If the navigation system is on, the
message
NAV ACTIVE
is shown in the
display.
Please refer to the COMAND* manual for
instructions on how to activate the route
guidance system*.
Malfunction memory menu
Use the malfunction memory menu to scan
malfunction and warning messages that
may be stored in the system. What
information is shown in the display
depends on whether malfunctions have
actually occurred.
i
To select the reverse side of the tape,
press button below track number on
the audio system display, or enter
request on the COMAND* system
located in the center dashboard.
Warning! G
Malfunction and warning messages are only
indicated for certain systems and are inten-
tionally not very detailed. The malfunction
and warning messages are simply a remind-
er with respect to the operation of certain
systems and do not replace the owner’s
and/or driver’s responsibility to maintain
the vehicle’s operating safety by having all
required maintenance and safety checks
performed on the vehicle and by bringing
the vehicle to an authorized Mercedes-Benz
Center to address the malfunction and
warning messages (
୴ page 261).