Filter
Top Products
100
Controls in detail
Memory function*
Storing exterior rear view mirror
parking position
For easier parking, you can adjust the
passenger-side exterior rear view mirror so
that you can see the right rear wheel as
soon as you engage reverse gear R.
You can store a parking position for the
passenger exterior rear view mirror for
each key using the memory button.
For information about activating the
parking position, see “Activating exterior
rear view mirror parking position”
(
୴ page 145).
1 Memory button
2 Adjustment button
3 Passenger side exterior rear view
mirror
̈ Stop the vehicle.
̈ Switch ignition on (if not already on).
̈ Press button 3.
The passenger side exterior rear view
mirror is selected.
̈ Adjust the exterior rear view mirror
with button 2 so that you see the rear
wheel and the road curb.
̈ Press memory button “M” 1 on the
door.
̈ Within three seconds press bottom of
adjustment button 2 above the exterior
lamp switch.
The parking position is stored if the
mirror does not move.
i
If the mirror does move, repeat the
above steps. After the setting is stored
you can move the mirror again.