Filter
Top Products
Black plate (88,1)
NOTE
l
Function number 3 is the factory setting for
your vehicle.
l
There are only a total of five auto lock/
unlock settings available for automatic
transaxle vehicles, and three for manual
transaxle vehicles. Be sure to press the
unlock side of the driver's door-lock switch
the correct number of times according to
the selected function number. If the switch
is mistakenly pressed six times on an
automatic transaxle vehicle or four times
on a manual transaxle, the procedure will
be invalidated. If this occurs, start the
procedure from the beginning.
Function
number
Function
*1
1
The auto door-lock functionis
disabled.
2
All the doors and the trunklid lock
automatically when the vehicle speed
is about 20 km/h (12 mph)or more.
3
All the doors and the trunklid lock
automatically when the vehicle speed
is about 20 km/h (12 mph)or more.
All the doors unlock whenthe ignition
is switched from ON toOff.
4
(Automatic transaxle vehicles only)
When the ignition is switchedON and
the shift lever is shifted frompark (P)
to any other gearposition, all the
doors and the trunk lid lock
automatically.
5
(Automatic transaxle vehicles only)
When the ignition is switchedON and
the shift lever is shifted frompark (P)
to any other gearposition, all the
doors and the trunk lid lock
automatically.
When the shift lever is shiftedto park
(P) while the ignition is switchedON,
all the doors unlock automatically.
*1 Other settings for theauto door lock function are
available at an Authorized MazdaDealer. For
details consult an AuthorizedMazda Dealer.
Refer to Personalization Features onpage 9-8.
1. Safely park the vehicle. All doors must
remain closed.
2. Switch the ignition ON.
3. Press and hold the lock side of the
driver's door-lock switch within 20
seconds of switching the ignition ON,
and make sure a beep sound is heard
about eight seconds afterwards.
4. Referring to the auto lock/unlock
function setting table and determine the
function number for the desired setting.
Press the unlock side of the driver's
door-lock switch the same number of
times as the selected function number
(Ex. If you select function 2, press the
unlock side of the switch only 2 times).
5. Three seconds after the function setting
has been changed, a beep sound will
beep in the amount of the selected
function number. (Ex. Function
number 3 = 3 beep sounds)
3-16
Before Driving
Doors and Locks
Mazda6_8DL2-EA-13F_Edition1 Page88
Monday, June 10 2013 3:52 PM
Form No.8DL2-EA-13F