Filter
Top Products
Black plate (192,1)
NOTE
Because heavy ice and snow can jam the wiper
blades, the wiper motor is protected from
motor breakdown, overheating and possible
fire by a circuit breaker. This mechanism will
automatically stop operation of the blades, but
only for about 5 minutes.
If this happens, turn off the wiper switch and
park off the right-of-way, and remove the snow
and ice.
After 5 minutes, turn on the switch and the
blades should operate normally. If they do not
resume functioning, consult an Authorized
Mazda Dealer as soon as possible. Drive to
the side of the road and park off the right-of-
way. Wait until the weatherclears before trying
to drive with the wipers inoperative.
qWindshield Wipers
Turn the wipers on by pressing the lever
up or down.
With intermittent wiper
Switch
Position
Wiper operation
MIST Single wipe cycle (mist)
INT
Intermittent
(vehicle speed-sensing)
LO Low speed
HI High speed
With auto-wiper control
Switch
Position
Wiper operation
MIST Single wipe cycle (mist)
AUTO Auto control
LO Low speed
HI High speed
Variable-speed intermittent wipers
Set the lever to the intermittent position
and choose the interval timing by rotating
the ring.
INT ring
Fast
Slow
NOTE
If the vehicle speed increases, the intermittent
interval will be shortened.
4-70
When Driving
Switches and Controls
Mazda6_8DL2-EA-13F_Edition1 Page192
Monday, June 10 2013 3:53 PM
Form No.8DL2-EA-13F