Filter
Top Products
Black plate (452,1)
If the vehicle is washed improperly, the
paint surface could be scratched. Here are
some examples of how scratching could
occur.
Scratches occur on the paint surface
when:
l
The vehicle is washed without first
rinsing off dirt and other foreign
matter.
l
The vehicle is washed with a rough,
dry, or dirty cloth.
l
The vehicle is washed at a car wash
that uses brushes that are dirty or too
stiff.
l
Cleansers or wax containing abrasives
are used.
NOTE
l
Mazda is not responsible for scratches
caused by automatic car washes or
improper washing.
l
Scratches are more noticeable on vehicles
with darker paint finishes.
To minimize scratches on the vehicle's
paint finish:
l
Rinse off any dirt or other foreign
matter using lukewarm or cold water
before washing.
l
Use plenty of lukewarm or cold water
and a soft cloth when washing the
vehicle. Do not use a nylon cloth.
l
Rub gently when washing or drying the
vehicle.
l
Take your vehicle only to a car wash
that keeps its brushes well maintained.
l
Do not use abrasive cleansers or wax
that contain abrasives.
CAUTION
Do not use steel wool, abrasive
cleaners, or strong detergents
containing highly alkaline or caustic
agents on chrome-plated or anodized
aluminum parts. This may damage
the protective coating; also, cleaners
and detergents may discolor or
deteriorate the paint.
Pay special attention to removing salt,
dirt, mud, and other foreign material from
the underside of the fenders, and make
sure the drain holes in the lower edges of
the doors and rocker panels are clean.
Insects, tar, tree sap, bird droppings,
industrial fallout, and similar deposits can
damage the finish if not removed
immediately. When prompt washing with
plain water is ineffective, use a mild soap
made for use on vehicles.
Thoroughly rinse off all soap with
lukewarm or cold water. Do not allow
soap to dry on the finish.
After washing the vehicle, dry it with a
clean chamois to prevent water spots from
forming.
6-60
Maintenance andCare
Appearance Care
Mazda6_8DL2-EA-13F_Edition1 Page452
Monday, June 10 2013 3:55 PM
Form No.8DL2-EA-13F