Filter
Top Products
Black plate (20,1)
NOTE
l
If the ignition is switched off while the seat
warmer is operating (High, Mid or Low)
and then switched ON again, the seat
warmer will automatically operate at the
temperature set before switching off the
ignition.
l
Use the seat warmer when the engine is
running. Leaving the seat warmeron for
long periods with the engine not running
could cause the battery power to be
depleted.
l
The temperature of the seat warmercannot
be adjusted beyond High, Mid and Low
because the seat warmer is controlled by a
thermostat.
qSeat Position Memory (Driver's
seat)
í
The seat position memory function allows
you to program the driver's seat to a
desired seat position and to call up a
programmed position with the simple
touch of a button.
CAUTION
Do not place fingers or hands around
the bottom of the seat while the seat
memory function is operating. The
seat moves automatically while the
seat memory function is operating
and fingers or hands could get
pinched and injured.
SET button
The seat position can be programmed or
operated using the following operations.
l
Operation of the buttons on the side of
the seat.
l
Operation using the key
NOTE
l
Individual seat positions can be
programmed to the two available
programming buttons on the side of the
driver's seat, plus one seat position for each
registered key.
l
If the vehicle has been serviced and the
battery cables disconnected, the
programmed seat positions will have been
erased. Re-program the seat positions.
Programming
1. Switch the ignition OFF.
2. Adjust the seat to the desired position
using the slide lifter and reclining
switches.
Refer to Seat Operation on page 2-5.
3. Press and hold the memory SET button
until a beep sound is heard.
2-8
Essential SafetyEquipment
í
Some models.
Seats
Mazda6_8DL2-EA-13F_Edition1 Page20
Monday, June 10 2013 3:51 PM
Form No.8DL2-EA-13F